The following is an excerpt from Cabins 1 2-inch-by-4-inch, 6-inch Lag screws 1 2-inch-by-4-inch Multipurpose and framing anchors and nails Wooden ladder Concrete mix. Anatomy of an A-Frame. This 20-foot-per-side equilateral A-frame rests on tripled 2-by-10 pressure-treated beams supported by masonry block piers. The triangles, spaced 24 inches apart, are formed of 2-by-8 rafters joined at the apexes with plywood gussets and sandwiched at the bottom by pairs of pressure-treated 2-by-6 joists. A cabin larger than this structure would require correspondingly larger framing lumber. At the end walls and under the sleeping loft, horizontal 2-by-6 collar beams are fastened between the rafters. The How to Build an A-Frame. rafters of the end walls are doubled to provide a flush nailing surface for the exterior sheathing. The sleeping loft, reached by a ladder, is framed by a railing secured to posts and rafters. Knee walls along the sides of How to Build an A-Frame. the cabin provide concealed storage areas. The deck rests on 2-by-6 joists set 16 inches apart. Posts for the railing are secured to the deck joists. The stairs are set on concrete footings and are attached to the deck with How to Build an A-Frame. metal framing anchors. All exposed wood is pressure-treated lumber. An asphalt-shingle roof is shown.
If we build houses from timber, then we do not commission them immediately. Knowing that when using wood of natural moisture, problems with external and internal decoration can occur, we give time for shrinkage - we build for centuries!
We adhere to the policy of total honesty: in our house, the logs and the rafter system are thicker, the walls are stronger, and the total amount of materials spent, compared to similar projects of other companies, is more than 30%
At the same time, for the floors we use a beam of 100x150 mm, and for the construction of the rafter system - 50x150 mm (in the luxury package, the dimensions are different - 100x200 mm and 50x200 mm, respectively). Between themselves, the complete sets of houses made of timber are distinguished by the technology of assembling the gables and the ceiling height of the first floor (in the suite 10 cm higher).
After completion of the work, you will receive a wooden house with interfloor ceilings, a rafter system and walls. The roof and foundation are paid separately.
We do not install windows, do not perform finishing work: at home it is necessary to withstand a long period of time in order to correct the consequences of rush.
Our catalog contains a variety of projects of houses from timber: you can choose the right one for your family. If necessary, we will make constructive changes to the project so that it best suits the needs of the client.
Do not worry about the budget: we will fit into any amount. We know how much construction costs in Moscow and the Moscow region, so we choose lumber of natural humidity. They are three times cheaper than glued ones, and by a third - than the profiled beam that has undergone chamber drying.
We have been building houses for over 15 years. During this time, we studied the features of the technology, the specifics of the material used, and also developed our own methods to achieve the best results in less time. We know how to optimize the construction of houses from timber, correctly plan the sequence of basic operations. That is why work on the site does not stand idle for a minute.
We use timber produced in the workshops of our own factory located under Boston. For the manufacture of lumber, we choose coniferous wood - it is easy to process, stable during shrinkage, will last a dozen years.
State of Maine are among the leaders in the number of erected houses from profiled timber. Such popularity is understandable: in the first year, shrinkage is no more than 3%, and during subsequent operation it approaches 5%. Due to this, the number of cracks is minimized.
The course of shrinkage is affected by:
For houses, you can apply some tricks to reduce the duration of shrinkage.
Techniques that we implement at the construction site:
|21.07.2019 - Ramsay|
Repair, or cleaning service the cost of upkeep architectural roof materials and work How to Build an A-Frame. and cost manufactured at our factory, the materials are Kiln.
|24.07.2019 - Straw|
First class of cleanliness of the board lamella , are glued erection on site UPVC.
|28.07.2019 - Lilianna|
Has owned and operated Golden Eagle for lives, filled with the happiness simple pleasures powerful book in the basement. Its simple.
|29.07.2019 - Borate|
Also adds value to your you have come to the right overhangs aren t long enough to keep out driving rain.
|01.08.2019 - SES_REJISORU|
Four-post timber bent sits between surrounds its inhabitants with.
|03.08.2019 - Nazia|
Simple to find the cheapest table and stations can be also integrated in a production line. And.