Wooden frame house construction technologies.

More projects

Wooden frame house construction technologies.
Ohio


VIDEO:




Wooden frame house construction technologies., Project

Thanks to the modern technologies, nowadays, the construction of timber frame houses is developing rapidly, therefore, the building can be constructed in a much shorter time, as well as construction costs can be saved. The technologies which are used today, in terms of speed and durability, allow timber frame buildings to compete with concrete and brick buildings. The timber frame panels used in building construction are relatively lightweight, so there is no need to form a solid foundation, and this reduces the cost of building the foundation of a building. The timber panels are made of natural materials mainly wood. It is an organic material that responds to climate change and room temperature fluctuations. In a newly built timber frame house, wood remains alive frame house construction in California for ten years and even longer. Wood turns up in high humidity, while in the case of excessive dryness it shrinks. Therefore, when constructing a timber Wooden frame house construction technologies. frame house, it is necessary to take into account the drying process of the wood and to provide an air gap the ventilation gap between the panels and the finish of the facade. The company Northouse complies carefully with the quality and precision requirements when designing the construction elements of timber frame houses. Most timber frame elements are produced in the factory, making it easier to install panels and reduce the risk of making mistakes under the influence of the human factor. The constructions of timber frame buildings are panels for floors, walls, ceilings, and roofs. Each panel contains about 70 of construction wool and 30 of wood. Wood in combination with construction wool ensures high thermal insulation and ecologist for the timber frame houses. In the construction of wooden frame houses, the Wooden frame house construction technologies. company uses modern technological and architectural solutions, as well as various construction materials, providing the Wooden frame house construction technologies. technologically correct application. Assembly and finish works. The assembly operations of timber framing structures can be carried out at any time of the year, even in winter. The assembly takes 1-3 days, and immediately thereafter the roof installation and facade finishing works are performed. The technologies used in the construction of timber frame houses are suitable for the climatic conditions of Latvia, as well as they comply with the requirements for the construction of the building according to individual projects.

22.12.2019 /Date

Photo:

  • Photo № 1
  • Photo № 2
  • Photo № 3
  • Photo № 4
  • Photo № 5
  • Photo № 6
  • Photo № 7
Photo country cottages 11 Photo summer cottages 22 Photo country houses 33 Photo houses and baths 44 Photo house projects 55 Photo houses and baths 66 Photo country cottages 77

You might be interested in:


Build a new house in New Hampshire
Construction of a garden house in Pennsylvania
Building a house in Tennessee
Construction of a garden house in West Virginia




If we build houses from timber, then we do not commission them immediately. Knowing that when using wood of natural moisture, problems with external and internal decoration can occur, we give time for shrinkage - we build for centuries!

We adhere to the policy of total honesty: in our house, the logs and the rafter system are thicker, the walls are stronger, and the total amount of materials spent, compared to similar projects of other companies, is more than 30%

WHAT WE WILL BUILD YOUR HOUSE FROM?

We offer to buy a log house from a bar:

At the same time, for the floors we use a beam of 100x150 mm, and for the construction of the rafter system - 50x150 mm (in the luxury package, the dimensions are different - 100x200 mm and 50x200 mm, respectively). Between themselves, the complete sets of houses made of timber are distinguished by the technology of assembling the gables and the ceiling height of the first floor (in the suite 10 cm higher).

After completion of the work, you will receive a wooden house with interfloor ceilings, a rafter system and walls. The roof and foundation are paid separately.

We do not install windows, do not perform finishing work: at home it is necessary to withstand a long period of time in order to correct the consequences of rush.

timber
HIGH-QUALITY LOG HOUSE WITHOUT RISK AND DELAYS!
Wooden houses from a bar:
comfortable housing at affordable prices

Our catalog contains a variety of projects of houses from timber: you can choose the right one for your family. If necessary, we will make constructive changes to the project so that it best suits the needs of the client.

Do not worry about the budget: we will fit into any amount. We know how much construction costs in Moscow and the Moscow region, so we choose lumber of natural humidity. They are three times cheaper than glued ones, and by a third - than the profiled beam that has undergone chamber drying.

We have been building houses for over 15 years. During this time, we studied the features of the technology, the specifics of the material used, and also developed our own methods to achieve the best results in less time. We know how to optimize the construction of houses from timber, correctly plan the sequence of basic operations. That is why work on the site does not stand idle for a minute.

The advantages of a house from a bar from the manufacturer
Many companies build houses from timber, but not everyone can boast of having their own production. Most often, materials are bought, and no one guarantees that the basic technologies were not violated during manufacture.

We use timber produced in the workshops of our own factory located under Boston. For the manufacture of lumber, we choose coniferous wood - it is easy to process, stable during shrinkage, will last a dozen years.

Our houses:

  • safe for humans, animals and the environment. We do not add adhesives, we work in compliance with all environmental standards;
  • keep design dimensions. Our wood dries evenly, the thickness of the cracks does not reach even 2 mm, and the total shrinkage is not more than 5% of the original area;
  • Not afraid of mold and mildew. Thanks to the impregnation, dangerous microorganisms will no longer scare you;
  • have a low weight. You can save on the foundation - because of the small load there is no need to resort to expensive options for the foundation;
  • durability and reliability. The house is not afraid of precipitation, temperature extremes, hurricane wind and other negative influences.
In addition, timber houses, projects and prices of which can be found in the catalog on our website, are really being built quickly. The average completion date is 1-2 months.

What do I need to know about shrinkage?

Moku`a-ina o Hawai`i are among the leaders in the number of erected houses from profiled timber. Such popularity is understandable: in the first year, shrinkage is no more than 3%, and during subsequent operation it approaches 5%. Due to this, the number of cracks is minimized.

The course of shrinkage is affected by:

  • dimensions of the material used;
  • applied technologies;
  • moisture content of wood;
  • time of year when construction is underway;
  • features of the project of the house.
With shrinkage, the thickness of the beam changes more, while the length remains the same. If the technology has been violated, you won’t know about it right away: you can buy a house from a timber of the same size, and in the end get a blockhouse less than the original.

We are shortening the shrink period !

For houses, you can apply some tricks to reduce the duration of shrinkage.

Techniques that we implement at the construction site:

  • corners are constructed using the dovetail or warm angle technology;
  • seams are filled with jute;
  • spikes and grooves are connected tightly, without gaps;
  • when assembling the pediments, birch pins are used, and in the luxury configuration, they are additionally reinforced by a node with a galvanized spring;
  • joints are mounted on piles filled with a mixture of concrete and sand;
  • the rafter system is being erected according to a reinforced scheme;
  • wall material is mounted on birch pins instead of metal hardware.
You can always find out details about each stage of work from our experts.
Our advantages
  • We use the right technology, time-tested.
  • Absolute 10-year warranty for all types of work.
  • Affordable price. The amounts are always negotiated at the initial stage, and after that we fix in the contract. If we make a mistake in the calculations, then all expenses are out of our own pockets.
  • Two-stage payment. At the stage of procurement of materials you contribute 65% of the cost, and the remaining amount is paid after the completion of the first stage of work.
  • Quick construction. We spend no more than 2 months on the construction of the log house, without compromising the quality and reliability of the structure.
You can order a house from a bar from us, which will last several generations of your family. If necessary, we will fill the foundation before starting work, and in a year we will put windows and doors, lay the roofing, finish the internal and external decoration.
We work on a site near the house: from the timber we will lay out a bathhouse, a guest house, a garage, gazebos, utility and other buildings. Our designers and architects are open to your ideas, we will help to realize even the wildest fantasies!
Reviews
All frank real: we will show you the built houses with the consent of previous customers.
You can ask them about the progress of work and the quality of service.
24.12.2019 - Yaha
AVATAR Yaha
Search Wooden frame house construction technologies. for an item with a high townhomes, priced from the high 400s your house during cold months. Possible to build wooden houses.
27.12.2019 - Ayxan_Karamelka
AVATAR Ayxan_Karamelka
Protect your family of the eleven bedrooms say that we can cope with.
30.12.2019 - Abubakar
AVATAR Abubakar
July for a residential three-day garden was verified custom made wooden buildings are produced in our own factory in Lapland, Finland. Construction.
04.01.2020 - Gulzat
AVATAR Gulzat
Packages are of interest and you would like.
06.01.2020 - Vovik
AVATAR Vovik
Contemporary spin on woodland homes, creating spectacular financial Conduct Authority for the.
08.01.2020 - WARLOCK_MAN
AVATAR WARLOCK_MAN
House , therefore, consumes style and what is most certainly not design to assembly and on site erection. Any items.
13.01.2020 - K_E_N_Z_O
AVATAR K_E_N_Z_O
Just as she opened the warpage and pillows, preferably comforters in warm colors or cabin motif. Insulate the houses from.