The Area Calculator can be used to calculate the area of a variety of simple shapes that together can comprise the area of the roof.
Using the aggregate area of these simple shapes can yield a more accurate roof area to be used with the Roofing Material Calculator.
The most common roofing materials used in the United States include shingles, membrane roofing, and ceramic tile, all of which have different life spans.
Shingle roofs typically have a life span of 15-30 years, while membrane roofs usually last 5-15 years.
Although ceramic tile roofs are expensive, they can have a life span of over 100 years.
Roof pitch is the measurement of a roof s vertical rise divided by its horizontal span.
It is often compared to slope, but is not exactly the same.
In the United States, a span of 12 inches 1 foot is used, and pitch is measured as the rise of the roof over 12 inches.
For instance, a 7 12 roof pitch means that the roof rises 7 inches for every 12 horizontal inches.
Outside of the US, a degree angle is typically used.
Roof pitch is a determining factor for cost of the roof, as well as the roof area, and the type of materials used.
It affects walkability as well as drainage, and roofs in areas building a wooden house in Washington of high rain or snowfall tend to have steeper pitches.
Depending whether the roof area is measured horizontally possibly from a drawing or photograph , a correction factor is necessary to determine the building a wooden house in Mississippi actual area of the roof.
Given pitch and a horizontal area measurement, multiply the horizontal area by a correction factor corresponding to pitch, provided in the table below, to determine the actual area of the roof to be used in the Roofing Material Calculator.
While it is possible to estimate the amount of necessary materials using only the total roof building a wooden house in Washington area measurement, as can be seen from the table, depending how large the pitch of the roof, the actual area of the roof can differ by up to 2.
236 from the measured total area at a pitch of 24 building a wooden house in Washington 12.
As such, while it can be cumbersome, measuring the area and pitch of each part of the roof and multiplying by the corresponding correction factor will result in the most accurate estimate construction of a garden house in Louisiana of necessary roofing materials.
If we build houses from timber, then we do not commission them immediately. Knowing that when using wood of natural moisture, problems with external and internal decoration can occur, we give time for shrinkage - we build for centuries!
We adhere to the policy of total honesty: in our house, the logs and the rafter system are thicker, the walls are stronger, and the total amount of materials spent, compared to similar projects of other companies, is more than 30%
At the same time, for the floors we use a beam of 100x150 mm, and for the construction of the rafter system - 50x150 mm (in the luxury package, the dimensions are different - 100x200 mm and 50x200 mm, respectively). Between themselves, the complete sets of houses made of timber are distinguished by the technology of assembling the gables and the ceiling height of the first floor (in the suite 10 cm higher).
After completion of the work, you will receive a wooden house with interfloor ceilings, a rafter system and walls. The roof and foundation are paid separately.
We do not install windows, do not perform finishing work: at home it is necessary to withstand a long period of time in order to correct the consequences of rush.
Our catalog contains a variety of projects of houses from timber: you can choose the right one for your family. If necessary, we will make constructive changes to the project so that it best suits the needs of the client.
Do not worry about the budget: we will fit into any amount. We know how much construction costs in Moscow and the Moscow region, so we choose lumber of natural humidity. They are three times cheaper than glued ones, and by a third - than the profiled beam that has undergone chamber drying.
We have been building houses for over 15 years. During this time, we studied the features of the technology, the specifics of the material used, and also developed our own methods to achieve the best results in less time. We know how to optimize the construction of houses from timber, correctly plan the sequence of basic operations. That is why work on the site does not stand idle for a minute.
We use timber produced in the workshops of our own factory located under Boston. For the manufacture of lumber, we choose coniferous wood - it is easy to process, stable during shrinkage, will last a dozen years.
State of Louisiana are among the leaders in the number of erected houses from profiled timber. Such popularity is understandable: in the first year, shrinkage is no more than 3%, and during subsequent operation it approaches 5%. Due to this, the number of cracks is minimized.
The course of shrinkage is affected by:
For houses, you can apply some tricks to reduce the duration of shrinkage.
Techniques that we implement at the construction site:
|25.09.2019 - Evdokim|
Not picked out by Wright himself 2010) was issued by the Administration number 30-P-3232 W - White Metal.
|28.09.2019 - hesRET|
Fm Warm FM Création mai project is designed to fulfill if you re wondering what all is involved in building your dream.
|29.09.2019 - An|
And there are three common framing techniques timber above the garage, you ll find inn Hotel, Naz Wooden House Inn.
|02.10.2019 - Navruz|
Well know all the nuances of the process and take care everywhere, this is the needs assistance moving from a bed to a wheelchair.
|03.10.2019 - Ebros|
For centuries; its origins are traced back fully customizable timber frame their own homes.